Splashbacks and tiling in Harringay

Is splashbacks and tiling right for your Harringay kitchen?

Homeowners in Harringay often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

Some households in Greater London want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. Harringay sits about 6 miles north of Westminster, and our Greater London coverage takes in everything in between.

What does the job involve?

After the survey visit we write the scope down. For splashbacks and tiling in Harringay it usually covers:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote

What should you budget for splashbacks and tiling in Harringay?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Harringay kitchen. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for splashbacks and tiling in Harringay?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£200–£520
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£390–£1,000
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£320–£780
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Harringay homes

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Harringay

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your splashbacks and tiling

Ask to see where the tiling will start before the first row goes on in your Harringay kitchen, so narrow cut tiles end up in corners rather than on show.
Choosing stone worktops for a Harringay kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Harringay

How much do splashbacks and tiling cost in Harringay?

Splashbacks and tiling in Harringay typically cost £200 to £520 including VAT for a tiled splashback, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Harringay do you work in?

All of them. Our Greater London coverage takes in the whole of Harringay, including the N4 and N8 postcode districts, as well as surrounding towns such as Wood Green. If you are unsure, send us your postcode.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Nearby places we cover

The same service is available a short drive from Harringay, including: