Kitchen Installers UK

Utility room fitting · Greater London

Utility room fitting in Harringay

From the survey to handover, utility room fitting in Harringay is run by us as one job, with the fitters and trades booked in the right order.

Guide price£520 to £9,100
Postcodes includeN4 and N8
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Why do people in Harringay choose utility room fitting?

If your Harringay home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.

When a new kitchen is being planned in Greater London, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. We cover all of Harringay, including the N4 and N8 postcode districts, and travel out to neighbouring towns across Greater London.

What we cover for utility room fitting in Harringay

The exact scope is agreed after the survey, but a typical job in Harringay covers:

  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Extract fan fitted to clear moisture from washing and drying
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • Utility sink and tap plumbed in, with new supplies and waste where none exist

Guide prices for utility room fitting in Harringay

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for utility room fitting in Harringay
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Harringay?

In and around Harringay, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Harringay

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Harringay homeowners

  • In a Harringay flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
  • If the utility will be in the garage of your Harringay home, make sure the space stays above freezing in winter for the pipes and machines.
  • Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
  • A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Harringay

How much does utility room fitting cost in Harringay?

Utility room fitting in Harringay typically costs £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Harringay do you work in?

All of them. Our Greater London coverage takes in the whole of Harringay, including the N4 and N8 postcode districts, as well as surrounding towns such as Wood Green. If you are unsure, send us your postcode.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting in neighbouring towns

Close to Harringay? We cover these nearby towns too:

Combine utility room fitting with other work

Free survey visit

Book a free survey visit in Harringay

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price