Splashbacks and tiling in Faversham

Is splashbacks and tiling right for your Faversham kitchen?

Homeowners in Faversham often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

Many people in Kent choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease. Faversham sits about 16 miles east of Maidstone, and our Kent coverage takes in everything in between.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Faversham kitchen after we have measured it:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Free survey visit to check the walls, agree the layout and give an itemised quote
Tiled splashbacks between the worktop and wall units, set out from a centre line
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Socket and switch plates refitted by an electrician once the tiling is finished

What should you budget for splashbacks and tiling in Faversham?

The figures below are guide prices for Faversham, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What should you budget for splashbacks and tiling in Faversham?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Faversham and what they mean for a kitchen

Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

Do you need approval for splashbacks and tiling in Faversham?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Planning ahead

Choosing stone worktops for a Faversham kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Hold a few of your chosen tiles against the wall in your Faversham kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Ask to see where the tiling will start before the first row goes on in your Faversham kitchen, so narrow cut tiles end up in corners rather than on show.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Faversham

How much do splashbacks and tiling cost in Faversham?

For a tiled splashback, budget around £170 to £460 including VAT in Faversham. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Faversham?

Yes. We work across Faversham, including the ME13 postcode district, and nearby towns such as Whitstable and Sittingbourne. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: