Splashbacks and tiling in Brentwood

Thinking about splashbacks and tiling in Brentwood?

Many people in Essex choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Landlords around Essex often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. We work throughout Brentwood (CM14) and across the wider Essex area.

What do splashbacks and tiling in Brentwood include?

After the survey visit we write the scope down. For splashbacks and tiling in Brentwood it usually covers:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote

Guide prices for splashbacks and tiling in Brentwood

The figures below are guide prices for Brentwood, including VAT and adjusted for typical costs across the East of England. The fixed price comes after we have measured up. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for splashbacks and tiling in Brentwood
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£160–£430
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£320–£860
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£270–£650
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Brentwood homes

You will find Victorian terraces, 1930s semis, post-war new town houses and chalet bungalows throughout Essex. In Harlow and Basildon, new-town houses often have a compact galley, while chalet bungalows and 1930s semis tend to have a small kitchen next to the dining area.

Busy commuter towns often have tight on-street parking, and estate houses with small front gardens can make it awkward to unload long worktops. Limescale is a fact of life in most of Essex because the water is hard, so a filter for a boiling water tap and regular descaling make sense.

Do you need approval for splashbacks and tiling in Brentwood?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Most kitchen fits need no planning permission, but weatherboarded listed cottages and homes in village conservation areas may need consent for a new external vent.

Before you book splashbacks and tiling in Brentwood

If your Essex kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Brentwood home, as cutting dust and adhesive travel further than you expect.
Choosing stone worktops for a Brentwood kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.

Questions about splashbacks and tiling in Brentwood

How much do splashbacks and tiling cost in Brentwood?

Guide prices in Brentwood are about £160 to £430 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Brentwood?

Yes. We work across Brentwood, including the CM14 postcode district, and nearby towns such as Billericay and Hornchurch. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Also covering nearby towns

The same service is available a short drive from Brentwood, including: