Sink and tap installation · Greater London
Sink and tap installation in New Cross
Sink and tap installation for New Cross homes: inset, undermount and ceramic sinks and kitchen taps fitted, including boiling water taps. Every job starts with a free survey visit and a written quote.
Why sink and tap installation for a New Cross home?
Some New Cross households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.
If a new dishwasher or washing machine is going next to the sink in your New Cross home, the trap and waste connections usually need changing as well. Kitchens in every part of New Cross are covered, and the survey visit is free wherever you are in Greater London.
What is included in the work?
After the survey visit we write the scope down. For sink and tap installation in New Cross it usually covers:
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Sink moved to a new position with new supply and waste runs
- Inset sink cut-outs made on site in laminate and wood worktops
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in New Cross?
These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £260–£520 |
| Boiling water tap installedTank under the sink, filter and power supply | £200–£460 |
| Sink moved to a new positionNew supplies and waste run | £520–£1,300 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Fitting kitchens in older and newer New Cross homes
Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
What rules apply to sink and tap installation in New Cross?
Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Before you book sink and tap installation in New Cross
- Choose the sink before stone worktops are templated in your New Cross kitchen, so the fabricator can cut and polish the undermount opening to suit it.
- For a ceramic farmhouse-style sink in your New Cross kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
- Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
Questions about sink and tap installation in New Cross
How much does sink and tap installation cost in New Cross?
Guide prices in New Cross are about £260 to £520 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of New Cross?
Yes. We work across New Cross, including the SE14 postcode district, and nearby towns such as Brockley and Greenwich. Book a free survey visit and we will arrange a time that suits you.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
Sink and tap installation in neighbouring towns
Neighbouring towns where we offer sink and tap installation:
- Sink and tap installation in Brockley
- Sink and tap installation in Greenwich
- Sink and tap installation in Peckham
- Sink and tap installation in Blackheath
- Sink and tap installation in Catford
- Sink and tap installation in Limehouse
- Sink and tap installation across Greater London