Sink and tap installation in Faversham

When does sink and tap installation make sense in Faversham?

Some Faversham households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.

Plenty of people in Faversham replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen. We cover all of Faversham, including the ME13 postcode district, and travel out to neighbouring towns across Kent.

What does the job involve?

After the survey visit we write the scope down. For sink and tap installation in Faversham it usually covers:

Inset sink cut-outs made on site in laminate and wood worktops
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Sink moved to a new position with new supply and waste runs
New sink fitted, sealed and connected to the existing supplies and waste
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections

Sink and tap installation prices in Faversham

Typical sink and tap installation prices for homes in Faversham, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Sink and tap installation prices in Faversham
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Faversham homes

In and around Faversham, homes range across Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

What rules apply to sink and tap installation in Faversham?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your sink and tap installation

Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Before buying a boiling water tap for your Faversham home, check its minimum water pressure and how much space it needs in the sink cupboard.
Ask whether a boiling water tap for your kitchen in Kent needs a filter, how often it should be changed and where it will sit in the cupboard.
Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.

Questions about sink and tap installation in Faversham

How much does sink and tap installation cost in Faversham?

Sink and tap installation in Faversham typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Faversham as well?

Yes. As well as Faversham itself, we cover the rest of Kent and nearby towns such as Whitstable and Sittingbourne. The process is the same wherever the kitchen is.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Faversham: