Sink and tap installation in Fareham

Thinking about sink and tap installation in Fareham?

If a new dishwasher or washing machine is going next to the sink in your Fareham home, the trap and waste connections usually need changing as well.

Homeowners across Hampshire adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in. Fareham sits about 10 miles east of Southampton, and our Hampshire coverage takes in everything in between.

What does sink and tap installation in Fareham include?

After the survey visit we write the scope down. For sink and tap installation in Fareham it usually covers:

Isolation valves on the hot and cold supplies, with flexible tap tails connected
Boiling water tap fitted with its tank, filter and power supply in the cupboard
New sink fitted, sealed and connected to the existing supplies and waste
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Every joint leak tested, with water flow and drainage checked before handover
Sink moved to a new position with new supply and waste runs

Sink and tap installation prices in Fareham

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Sink and tap installation prices in Fareham
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Local homes and their kitchens

Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Fareham

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Fareham homeowners

Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Ask whether a boiling water tap for your kitchen in Hampshire needs a filter, how often it should be changed and where it will sit in the cupboard.
Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.

Questions about sink and tap installation in Fareham

How much does sink and tap installation cost in Fareham?

Sink and tap installation in Fareham typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Fareham as well?

Yes. As well as Fareham itself, we cover the rest of Hampshire and nearby towns such as Gosport and Portsmouth. The process is the same wherever the kitchen is.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Nearby places we cover

Close to Fareham? We cover these nearby towns too: