Sink and tap installation in Eastleigh

Is sink and tap installation right for your Eastleigh kitchen?

An Eastleigh kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.

People in Eastleigh with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later. Kitchens in every part of Eastleigh are covered, and the survey visit is free wherever you are in Hampshire.

What is in a typical job?

Here is what usually goes into sink and tap installation, adjusted to your Eastleigh kitchen after we have measured it:

Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
New sink fitted, sealed and connected to the existing supplies and waste
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Every joint leak tested, with water flow and drainage checked before handover
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Boiling water tap fitted with its tank, filter and power supply in the cupboard

Sink and tap installation prices in Eastleigh

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Eastleigh kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Sink and tap installation prices in Eastleigh
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Eastleigh homes

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Eastleigh

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book sink and tap installation in Eastleigh

Find the stopcock in your Eastleigh home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.

Questions about sink and tap installation in Eastleigh

How much does sink and tap installation cost in Eastleigh?

For plumbing in a new sink and tap, budget around £230 to £460 including VAT in Eastleigh. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Eastleigh?

Yes. We work across Eastleigh, including the SO50 postcode district, and nearby towns such as Southampton and Romsey. Book a free survey visit and we will arrange a time that suits you.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Also covering nearby towns

Neighbouring towns where we offer sink and tap installation: