Sink and tap installation · England
Sink and tap installation in Devon
If you need sink and tap installation anywhere in Devon, we survey the kitchen, agree the scope with you and book every trade through to handover.
When does sink and tap installation make sense in Devon?
Landlords in Devon often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.
Plenty of people in Devon replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.
What does sink and tap installation in Devon include?
The exact scope is agreed after the survey, but a typical job in Devon covers:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in Devon?
As a starting point for Devon, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £210–£410 |
| Boiling water tap installedTank under the sink, filter and power supply | £150–£360 |
| Sink moved to a new positionNew supplies and waste run | £410–£1,000 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across Devon
You will find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows throughout Devon. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.
Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.
Cob and stone cottages often have walls that are out of true and need breathable finishes, which affects how units and splashbacks are fixed. Seaside bungalows more often need a full replacement with better storage, sometimes with the old dining area opened into the kitchen.
Rules for sink and tap installation in Devon
Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.
Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.
Before you start
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
- If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
- Choose the sink before stone worktops are templated in your Devon kitchen, so the fabricator can cut and polish the undermount opening to suit it.
- Find the stopcock in your Devon home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Questions about sink and tap installation in Devon
How much does sink and tap installation cost in Devon?
Sink and tap installation in Devon typically costs £210 to £410 including VAT for plumbing in a new sink and tap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Devon?
Yes. We carry out sink and tap installation across Devon, including Plymouth, Exeter, Paignton and Torquay. Every job starts with a free survey visit and an itemised written quote.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.
Sink and tap installation in towns across Devon
Choose a town for local guide prices and postcode coverage:
- Sink and tap installation in Plymouth
- Sink and tap installation in Exeter
- Sink and tap installation in Paignton
- Sink and tap installation in Torquay
- Sink and tap installation in Newton Abbot
- Sink and tap installation in Exmouth
- Sink and tap installation in Barnstaple
- Sink and tap installation in Bideford
- Sink and tap installation in Plymstock
- Sink and tap installation in Tiverton
- Sink and tap installation in Tavistock
- Sink and tap installation in Honiton
- Sink and tap installation in Ilfracombe
- Sink and tap installation in Totnes
- Sink and tap installation in Okehampton