Sink and tap installation in Crawley

When does sink and tap installation make sense in Crawley?

If a new dishwasher or washing machine is going next to the sink in your Crawley home, the trap and waste connections usually need changing as well.

Some Crawley households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size. Our West Sussex coverage reaches every part of Crawley (RH11 and RH77) and out towards Horley.

What is in a typical job?

Here is what usually goes into sink and tap installation, adjusted to your Crawley kitchen after we have measured it:

New sink fitted, sealed and connected to the existing supplies and waste
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Every joint leak tested, with water flow and drainage checked before handover
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Inset sink cut-outs made on site in laminate and wood worktops

What should you budget for sink and tap installation in Crawley?

The figures below are guide prices for Crawley, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for sink and tap installation in Crawley?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Crawley

The housing mix across West Sussex includes 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, so no two kitchen fits are quite alike. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Regulations for kitchen work in Crawley

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Practical advice for Crawley homeowners

Ask whether a boiling water tap for your kitchen in West Sussex needs a filter, how often it should be changed and where it will sit in the cupboard.
For a ceramic farmhouse-style sink in your Crawley kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Choose the sink before stone worktops are templated in your Crawley kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Crawley

How much does sink and tap installation cost in Crawley?

Sink and tap installation in Crawley typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Crawley as well?

Yes. As well as Crawley itself, we cover the rest of West Sussex and nearby towns such as Horley and Horsham. The process is the same wherever the kitchen is.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Crawley: