Sink and tap installation in Bognor Regis

Why sink and tap installation for a Bognor Regis home?

Landlords in West Sussex often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.

A Bognor Regis kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run. Bognor Regis sits about 31 miles south-west of Crawley, and our West Sussex coverage takes in everything in between.

What does sink and tap installation in Bognor Regis include?

After the survey visit we write the scope down. For sink and tap installation in Bognor Regis it usually covers:

Sink moved to a new position with new supply and waste runs
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Every joint leak tested, with water flow and drainage checked before handover
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed

Guide prices for sink and tap installation in Bognor Regis

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for sink and tap installation in Bognor Regis
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

House types around Bognor Regis and what they mean for a kitchen

In and around Bognor Regis, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

What rules apply to sink and tap installation in Bognor Regis?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Tips before you start

Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Ask whether a boiling water tap for your kitchen in West Sussex needs a filter, how often it should be changed and where it will sit in the cupboard.
Before buying a boiling water tap for your Bognor Regis home, check its minimum water pressure and how much space it needs in the sink cupboard.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Bognor Regis

How much does sink and tap installation cost in Bognor Regis?

Sink and tap installation in Bognor Regis typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Bognor Regis as well?

Yes. As well as Bognor Regis itself, we cover the rest of West Sussex and nearby towns such as Chichester and Littlehampton. The process is the same wherever the kitchen is.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Sink and tap installation near Bognor Regis

Neighbouring towns where we offer sink and tap installation: