Kitchen plumbing in Worthing

What prompts kitchen plumbing in Worthing?

Plenty of Worthing kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber.

When a kitchen in Worthing goes from a closed room to an open-plan space, the sink and dishwasher often move to a new wall with new waste runs. We cover all of Worthing, including the BN11 postcode district, and travel out to neighbouring towns across West Sussex.

What is included in the work?

Your written quote lists everything included. For kitchen plumbing, that normally means:

Waste pipes laid to a steady fall, with an access point for clearing blockages
A cold feed for a boiling water tap tank or a fridge with a water dispenser
Isolation valves on each tap and appliance feed for quick shut-off
Redundant pipes cut back to the live supply and capped, then a full leak check
A survey of the stopcock, supply pipes, waste route and drain connection
Dishwasher and washing machine supplies, with waste connections through suitable traps

What does kitchen plumbing cost in Worthing?

Typical kitchen plumbing prices for homes in Worthing, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does kitchen plumbing cost in Worthing?
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill	£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Fitting kitchens in older and newer Worthing homes

In and around Worthing, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Do you need approval for kitchen plumbing in Worthing?

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Getting the most from your kitchen plumbing

In a flat in Worthing, check your lease before moving the sink, as moving services usually needs the freeholder's written consent.
Measure the cupboard under your sink before buying a boiling water tap for your Worthing kitchen, as the tank and pipework need clear space.
If your Worthing home is on a water meter, a slow drip shows up on the bill, so look under the sink a week after the fit.
Check your water pressure suits the tap you want, particularly a boiling water tap or a tall spray tap; the tap's instructions give its minimum.

Questions about kitchen plumbing in Worthing

How much does kitchen plumbing cost in Worthing?

For connecting the sink, dishwasher and washing machine, budget around £230 to £580 including VAT in Worthing. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Worthing as well?

Yes. As well as Worthing itself, we cover the rest of West Sussex and nearby towns such as Lancing and Shoreham-by-Sea. The process is the same wherever the kitchen is.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

When does kitchen plumbing need building control?

Most kitchen plumbing does not. Replacing a sink, adding appliance connections and rerouting supply pipes inside the kitchen are routine. A new connection to an underground drain, or a change in how waste water is discharged, needs building control approval in England, Wales and Northern Ireland, or a building warrant in Scotland. Every fitting must also meet the water fittings rules for your nation.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Nearby places we cover

The same service is available a short drive from Worthing, including: