Kitchen plumbing in Sittingbourne

Why kitchen plumbing for a Sittingbourne home?

Homeowners across Kent often want the washing machine out of the kitchen and into a utility space, which calls for new supplies and a separate waste.

People adding a boiling water tap in Sittingbourne usually need a fresh cold feed and room under the sink for the tank, planned alongside the sink unit. We work throughout Sittingbourne (ME10) and across the wider Kent area.

What is included in the work?

Here is what usually goes into kitchen plumbing, adjusted to your Sittingbourne kitchen after we have measured it:

A cold feed for a boiling water tap tank or a fridge with a water dispenser
Hot and cold supplies run to the new sink position
Dishwasher and washing machine supplies, with waste connections through suitable traps
Isolation valves on each tap and appliance feed for quick shut-off
A survey of the stopcock, supply pipes, waste route and drain connection
Radiators moved or replaced so they clear the new units

Kitchen plumbing prices in Sittingbourne

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Kitchen plumbing prices in Sittingbourne
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill	£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Local homes and their kitchens

Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Sittingbourne

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Planning ahead

If your Sittingbourne home is on a water meter, a slow drip shows up on the bill, so look under the sink a week after the fit.
Plan a day or two without a working sink in your Sittingbourne kitchen, and fill a few large bottles before the water goes off.
Locate the stopcock in your Sittingbourne home and check it turns before fitting day; a seized one may need replacing before the plumber can start.
If a radiator sits where new units will go, decide early whether to move it, swap it for a tall one or fit a plinth heater.

Questions about kitchen plumbing in Sittingbourne

How much does kitchen plumbing cost in Sittingbourne?

Kitchen plumbing in Sittingbourne typically costs £230 to £580 including VAT for connecting the sink, dishwasher and washing machine, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Sittingbourne as well?

Yes. As well as Sittingbourne itself, we cover the rest of Kent and nearby towns such as Faversham and Gillingham. The process is the same wherever the kitchen is.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

Can a kitchen sink be moved to a different wall?

Yes, usually. The supplies are the easy part; the waste decides it, because it needs a steady fall all the way to the stack or drain. On a suspended timber floor the pipe can often run between the joists, while on solid concrete a channel may need to be cut and filled. Where a fall cannot be achieved, a pumped waste is sometimes considered.

Also covering nearby towns

The same service is available a short drive from Sittingbourne, including: