Kitchen plumbing in Pimlico

What prompts kitchen plumbing in Pimlico?

Plenty of Pimlico kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber.

Homeowners across Greater London often want the washing machine out of the kitchen and into a utility space, which calls for new supplies and a separate waste. Our Greater London coverage reaches every part of Pimlico (SW1) and out towards Westminster.

What is included in the work?

After the survey visit we write the scope down. For kitchen plumbing in Pimlico it usually covers:

Redundant pipes cut back to the live supply and capped, then a full leak check
Dishwasher and washing machine supplies, with waste connections through suitable traps
Isolation valves on each tap and appliance feed for quick shut-off
Radiators moved or replaced so they clear the new units
A cold feed for a boiling water tap tank or a fridge with a water dispenser
Hot and cold supplies run to the new sink position

Kitchen plumbing prices in Pimlico

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Pimlico kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Kitchen plumbing prices in Pimlico
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£260–£650
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£520–£1,300
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£780–£2,000
Radiator moved or replacedDrain down, new pipework and refill	£320–£650

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Kitchens in homes around Pimlico

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for kitchen plumbing in Pimlico?

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book kitchen plumbing in Pimlico

Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
Measure the cupboard under your sink before buying a boiling water tap for your Pimlico kitchen, as the tank and pipework need clear space.
If your house in Greater London has a solid floor, ask at the survey where a waste could run before you settle on an island sink.
Put the dishwasher next to the sink so its supply and waste stay short, easy to reach and less likely to block.

Questions about kitchen plumbing in Pimlico

How much does kitchen plumbing cost in Pimlico?

Guide prices in Pimlico are about £260 to £650 including VAT for connecting the sink, dishwasher and washing machine. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Pimlico as well?

Yes. As well as Pimlico itself, we cover the rest of Greater London and nearby towns such as Westminster and Battersea. The process is the same wherever the kitchen is.

Can a kitchen sink be moved to a different wall?

Yes, usually. The supplies are the easy part; the waste decides it, because it needs a steady fall all the way to the stack or drain. On a suspended timber floor the pipe can often run between the joists, while on solid concrete a channel may need to be cut and filled. Where a fall cannot be achieved, a pumped waste is sometimes considered.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Kitchen plumbing in neighbouring towns

Neighbouring towns where we offer kitchen plumbing: