Kitchen plumbing in Feltham

Who usually needs kitchen plumbing in Feltham?

In older properties across Greater London, kitchen pipework has often been extended many times over; a refit is the chance to replace it with a tidy, accessible layout.

A radiator under the window or on the only long wall is a familiar problem in Feltham kitchens; moving it clears space for a full run of base units. Homes right across Feltham are covered, as are nearby places such as Hanworth, Ashford, Surrey and the villages in between.

What is included in the work?

Your written quote lists everything included. For kitchen plumbing, that normally means:

A cold feed for a boiling water tap tank or a fridge with a water dispenser
Isolation valves on each tap and appliance feed for quick shut-off
Hot and cold supplies run to the new sink position
Radiators moved or replaced so they clear the new units
Waste pipes laid to a steady fall, with an access point for clearing blockages
A survey of the stopcock, supply pipes, waste route and drain connection

Guide prices for kitchen plumbing in Feltham

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen plumbing in Feltham
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£260–£650
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£520–£1,300
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£780–£2,000
Radiator moved or replacedDrain down, new pipework and refill	£320–£650

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Feltham

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book kitchen plumbing in Feltham

If your Feltham home is on a water meter, a slow drip shows up on the bill, so look under the sink a week after the fit.
Plan a day or two without a working sink in your Feltham kitchen, and fill a few large bottles before the water goes off.
In a flat in Feltham, check your lease before moving the sink, as moving services usually needs the freeholder's written consent.
Keep the sink near an outside wall or the existing stack where you can, because long waste runs need a fall the units must hide.

Questions about kitchen plumbing in Feltham

How much does kitchen plumbing cost in Feltham?

Kitchen plumbing in Feltham typically costs £260 to £650 including VAT for connecting the sink, dishwasher and washing machine, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Feltham before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Feltham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

When does kitchen plumbing need building control?

Most kitchen plumbing does not. Replacing a sink, adding appliance connections and rerouting supply pipes inside the kitchen are routine. A new connection to an underground drain, or a change in how waste water is discharged, needs building control approval in England, Wales and Northern Ireland, or a building warrant in Scotland. Every fitting must also meet the water fittings rules for your nation.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Also covering nearby towns

The same service is available a short drive from Feltham, including: