Kitchen Installers UK

Kitchen plumbing · England

Kitchen plumbing in East Sussex

Homeowners and landlords across East Sussex can book us for kitchen plumbing: supplies, isolation valves and wastes for the sink, dishwasher and washing machine in a new layout.

Guide price£230 to £1,700
Towns covered15 towns, including Brighton
TimescaleHalf a day to 2 days, split between first fix and second fix
First-fix supply pipes and a waste pipe coming through a stripped kitchen wall where the new sink will be fitted

When does kitchen plumbing make sense in East Sussex?

People adding a boiling water tap in East Sussex usually need a fresh cold feed and room under the sink for the tank, planned alongside the sink unit.

Plenty of East Sussex kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber.

What does kitchen plumbing in East Sussex include?

After the survey visit we write the scope down. For kitchen plumbing in East Sussex it usually covers:

  • A survey of the stopcock, supply pipes, waste route and drain connection
  • Hot and cold supplies run to the new sink position
  • Isolation valves on each tap and appliance feed for quick shut-off
  • Dishwasher and washing machine supplies, with waste connections through suitable traps
  • Waste pipes laid to a steady fall, with an access point for clearing blockages
  • Radiators moved or replaced so they clear the new units
  • A cold feed for a boiling water tap tank or a fridge with a water dispenser
  • Redundant pipes cut back to the live supply and capped, then a full leak check

How much does kitchen plumbing cost in East Sussex?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

How much does kitchen plumbing cost in East Sussex?
Typical projectGuide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Kitchens in homes across East Sussex

The housing mix across East Sussex includes Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.

Flats in converted Regency and Victorian houses often have narrow kitchens that need careful planning to fit a fridge, washing machine and enough worktop. In a 1930s semi or bungalow, opening the kitchen into the dining room is a common change.

Rules for kitchen plumbing in East Sussex

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Before you start

  • Ask for redundant pipes to be removed back to the live supply rather than left behind units, where they can hold stale water or leak.
  • Put the dishwasher next to the sink so its supply and waste stay short, easy to reach and less likely to block.
  • If a radiator sits where new units will go, decide early whether to move it, swap it for a tall one or fit a plinth heater.
  • Keep the sink near an outside wall or the existing stack where you can, because long waste runs need a fall the units must hide.
  • Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
  • Measure the cupboard under your sink before buying a boiling water tap for your East Sussex kitchen, as the tank and pipework need clear space.

Questions about kitchen plumbing in East Sussex

How much does kitchen plumbing cost in East Sussex?

For connecting the sink, dishwasher and washing machine, budget around £230 to £580 including VAT in East Sussex. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of East Sussex?

Yes. We carry out kitchen plumbing across East Sussex, including Brighton, Eastbourne, Hastings and Hove. Every job starts with a free survey visit and an itemised written quote.

When does kitchen plumbing need building control?

Most kitchen plumbing does not. Replacing a sink, adding appliance connections and rerouting supply pipes inside the kitchen are routine. A new connection to an underground drain, or a change in how waste water is discharged, needs building control approval in England, Wales and Northern Ireland, or a building warrant in Scotland. Every fitting must also meet the water fittings rules for your nation.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

Kitchen plumbing in towns across East Sussex

Choose a town for local guide prices and postcode coverage:

Kitchen plumbing in nearby areas

Free survey visit

Book a free survey visit in East Sussex

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price