Kitchen plumbing in Crawley

Why kitchen plumbing for a Crawley home?

Homeowners across West Sussex often want the washing machine out of the kitchen and into a utility space, which calls for new supplies and a separate waste.

In older properties across West Sussex, kitchen pipework has often been extended many times over; a refit is the chance to replace it with a tidy, accessible layout. Kitchens in every part of Crawley are covered, and the survey visit is free wherever you are in West Sussex.

What is included in the work?

Your written quote lists everything included. For kitchen plumbing, that normally means:

Isolation valves on each tap and appliance feed for quick shut-off
Redundant pipes cut back to the live supply and capped, then a full leak check
Dishwasher and washing machine supplies, with waste connections through suitable traps
A survey of the stopcock, supply pipes, waste route and drain connection
Waste pipes laid to a steady fall, with an access point for clearing blockages
A cold feed for a boiling water tap tank or a fridge with a water dispenser

Kitchen plumbing prices in Crawley

Typical kitchen plumbing prices for homes in Crawley, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Kitchen plumbing prices in Crawley
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill	£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

What kind of kitchens do we fit in Crawley?

The housing mix across West Sussex includes 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, so no two kitchen fits are quite alike. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

What rules apply to kitchen plumbing in Crawley?

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Practical advice for Crawley homeowners

If your house in West Sussex has a solid floor, ask at the survey where a waste could run before you settle on an island sink.
Plan a day or two without a working sink in your Crawley kitchen, and fill a few large bottles before the water goes off.
Ask for an access point on the waste near the sink, so a future blockage can be cleared without taking a unit out.
Check your water pressure suits the tap you want, particularly a boiling water tap or a tall spray tap; the tap's instructions give its minimum.

Questions about kitchen plumbing in Crawley

How much does kitchen plumbing cost in Crawley?

Kitchen plumbing in Crawley typically costs £230 to £580 including VAT for connecting the sink, dishwasher and washing machine, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Crawley as well?

Yes. As well as Crawley itself, we cover the rest of West Sussex and nearby towns such as Horley and Horsham. The process is the same wherever the kitchen is.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

What happens to the old pipes during a kitchen refit?

Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.

Kitchen plumbing near Crawley

Neighbouring towns where we offer kitchen plumbing: