Kitchen electrics in New Cross

Is kitchen electrics right for your New Cross kitchen?

Buyers of older houses across Greater London sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in.

When a New Cross kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling. We work throughout New Cross (SE14) and across the wider Greater London area.

What is in a typical job?

Your written quote lists everything included. For kitchen electrics, that normally means:

Second fix of sockets, switches and appliance connections once tiling is done
A dedicated circuit for an oven, range cooker or induction hob where needed
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
Testing, the correct certificate, and notification of the work where it is required
Supplies for the cooker hood, under-cabinet lights and a boiling water tap

What should you budget for kitchen electrics in New Cross?

The figures below are guide prices for New Cross, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for kitchen electrics in New Cross?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£320–£650
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£650–£2,000
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£390–£910

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

What kind of kitchens do we fit in New Cross?

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to kitchen electrics in New Cross?

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for New Cross homeowners

Expect the power to be off in parts of your New Cross home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
Choose socket and switch finishes before second fix, especially metal faceplates, so they arrive in time and sit well with the handles and tap.
If you let a property in Greater London, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Decide on lighting, island power and any boiling water tap before plastering, as cables are far harder to add after tiling.

Questions about kitchen electrics in New Cross

How much do kitchen electrics cost in New Cross?

For extra sockets or spurs on existing circuits, budget around £320 to £650 including VAT in New Cross. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you cover all of New Cross?

Yes. We work across New Cross, including the SE14 postcode district, and nearby towns such as Brockley and Greenwich. Book a free survey visit and we will arrange a time that suits you.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Kitchen electrics near New Cross

Close to New Cross? We cover these nearby towns too: