Kitchen electrics · Scotland
Kitchen electrics in Glasgow
Kitchen electrics in Glasgow start with a free visit to measure up, then a written scope and quote before any work begins.
What prompts kitchen electrics in Glasgow?
When a Glasgow kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling.
If you are moving the hob to an island or swapping gas for induction in your Glasgow home, the kitchen needs a new supply routed to the new cooking position.
What do kitchen electrics in Glasgow include?
Your written quote lists everything included. For kitchen electrics, that normally means:
- A check of the consumer unit, existing circuits and earthing before the layout is fixed
- Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
- First-fix cables and back boxes run before plastering or boarding
- A dedicated circuit for an oven, range cooker or induction hob where needed
- Accessible isolation switches for integrated appliances, reachable without pulling units out
- Supplies for the cooker hood, under-cabinet lights and a boiling water tap
- Second fix of sockets, switches and appliance connections once tiling is done
- Testing, the correct certificate, and notification of the work where it is required
How much do kitchen electrics cost in Glasgow?
The figures below are guide prices for Glasgow, including VAT and adjusted for typical costs across Edinburgh and Glasgow. The fixed price comes after we have measured up. Costs in Edinburgh and Glasgow sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Extra sockets or spurs on existing circuitsNew positions to suit the layout | £260–£510 |
| Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting | £510–£1,500 |
| New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified | £310–£710 |
Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.
Kitchens in homes across Glasgow
Across Glasgow you will often find sandstone tenement flats, Victorian terraces and villas, four-in-a-block flats and post-war high-rise flats, and each shapes the kitchen differently. Tenement flats often have a kitchen off the hall, sometimes with an old bed recess, while four-in-a-block flats tend to have a narrow galley at the back.
Glasgow's mains water is soft, much of it from Loch Katrine, so limescale is rarely a problem and taps and boiling water taps stay cleaner. Tenement closes and common stairs mean carrying units by hand, often to upper floors, and permit parking near the door may need arranging for delivery day.
Tenement kitchens often have high ceilings and a former bed recess, which can take tall units, a fridge freezer or a small dining nook. Four-in-a-block flats and ex-council houses more often need a full refit with new wiring, better storage and a more practical layout.
Rules for kitchen electrics in Glasgow
In Scotland, electrical work in a house does not normally need a building warrant, but it must meet building standards 4.5 and 4.6 and be designed, installed and tested to BS 7671. The notification arrangements used in England and Wales do not apply here. Ask for an Electrical Installation Certificate for a new circuit, or a Minor Electrical Installation Works Certificate for additions to an existing one, and keep it with your property papers. Every home in Scotland must have an interlinked heat alarm in the kitchen, so it is kept or refitted, and tested, as part of the job.
Many of the city's tenement streets, including much of the West End, are conservation areas, so a new external vent may need consent, and common walls involve neighbours.
Before you start
- Ask for isolation switches for the dishwasher, fridge and washing machine to be reachable without moving an appliance or a unit.
- Decide on lighting, island power and any boiling water tap before plastering, as cables are far harder to add after tiling.
- Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.
- Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.
- Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
- Expect the power to be off in parts of your Glasgow home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
Questions about kitchen electrics in Glasgow
How much do kitchen electrics cost in Glasgow?
Kitchen electrics in Glasgow typically cost £260 to £510 including VAT for extra sockets or spurs on existing circuits, based on prices in Edinburgh and Glasgow. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Glasgow?
Yes. We carry out kitchen electrics across Glasgow. Every job starts with a free survey visit and an itemised written quote.
Do I need an electrician to add sockets in a kitchen?
Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.
What is first fix and second fix in kitchen electrics?
First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.
Does an induction hob need its own circuit?
Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.