Kitchen electrics in Bath

Thinking about kitchen electrics in Bath?

If you are moving the hob to an island or swapping gas for induction in your Bath home, the kitchen needs a new supply routed to the new cooking position.

Buyers of older houses across Somerset sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in. We cover all of Bath, including the BA1 postcode district, and travel out to neighbouring towns across Somerset.

What does the job involve?

After the survey visit we write the scope down. For kitchen electrics in Bath it usually covers:

Supplies for the cooker hood, under-cabinet lights and a boiling water tap
First-fix cables and back boxes run before plastering or boarding
Second fix of sockets, switches and appliance connections once tiling is done
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
A dedicated circuit for an oven, range cooker or induction hob where needed
Accessible isolation switches for integrated appliances, reachable without pulling units out

Guide prices for kitchen electrics in Bath

The figures below are guide prices for Bath, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.

Guide prices for kitchen electrics in Bath
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£260–£520
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£520–£1,500
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£310–£720

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

What kind of kitchens do we fit in Bath?

Typical homes in this part of Somerset include Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Regulations for kitchen work in Bath

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Worth knowing before the fit

If you live in a flat in Bath, find out where your consumer unit and meter are, as some sit in communal cupboards that need the managing agent's access.
Choose socket and switch finishes before second fix, especially metal faceplates, so they arrive in time and sit well with the handles and tap.
Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Bath

How much do kitchen electrics cost in Bath?

Guide prices in Bath are about £260 to £520 including VAT for extra sockets or spurs on existing circuits. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Bath do you work in?

All of them. Our Somerset coverage takes in the whole of Bath, including the BA1 postcode district, as well as surrounding towns such as Keynsham. If you are unsure, send us your postcode.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

What paperwork should I get for kitchen electrics?

You should get an Electrical Installation Certificate for any new circuit and a Minor Electrical Installation Works Certificate for additions to an existing circuit, such as extra sockets. In England and Wales, notifiable work is also registered with the council through a competent person scheme or building control, and a compliance certificate follows. Keep these papers safe, because buyers' solicitors and letting agents often ask for them.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Nearby places we cover

Close to Bath? We cover these nearby towns too: