Kitchen worktop fitting in Bath

Is kitchen worktop fitting right for your Bath kitchen?

If your Somerset kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

Some homeowners across Somerset have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. Our Somerset coverage reaches every part of Bath (BA1) and out towards Keynsham.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Bath covers:

Quartz, granite or sintered stone templated once the base units are fixed and level
Free survey visit to measure the runs and check the base units are level
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator

What does kitchen worktop fitting cost in Bath?

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

What does kitchen worktop fitting cost in Bath?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£520–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£930–£1,900
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,300
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,900–£3,600
Old worktops removed and taken awayMore for stone	£80–£260

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Bath homes

You will find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses throughout Somerset. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Bath

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Before you book kitchen worktop fitting in Bath

Check that full-length worktops can get into your Bath home; long lengths need a clear, straight route through the front door and hall.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Before templating day at your Bath home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Bath

How much does kitchen worktop fitting cost in Bath?

Guide prices in Bath are about £520 to £1,200 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Bath as well?

Yes. As well as Bath itself, we cover the rest of Somerset and nearby towns such as Keynsham and Trowbridge. The process is the same wherever the kitchen is.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Nearby places we cover

The same service is available a short drive from Bath, including: