Kitchen Installers UK

Integrated appliance installation · Greater London

Integrated appliance installation in New Cross

If you live in New Cross and need integrated appliance installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide priceFrom £50 each
Postcodes includeSE14
TimescaleUsually part of the fit
An installer adjusting the door of an integrated dishwasher so it lines up with the drawer fronts beside it

Is integrated appliance installation right for your New Cross kitchen?

Some people in New Cross upgrade to a double oven at the same time as other appliances, which can mean a new cooker circuit from the consumer unit as well.

Many people in New Cross buy integrated appliances separately from the kitchen and then need someone to fit them so the doors line up with everything around them. We cover all of New Cross, including the SE14 postcode district, and travel out to neighbouring towns across Greater London.

What is in a typical job?

Your written quote lists everything included. For integrated appliance installation, that normally means:

  • Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
  • Integrated fridges and freezers fixed into tall or under-counter housings
  • Dishwashers anchored under the worktop, levelled and connected to the supply and waste
  • Built-in ovens and microwaves fixed into housings with the required ventilation space
  • Furniture doors attached with the fixed-hinge or sliding-hinge kit and aligned
  • Leak checks, final door adjustments and each appliance switched on and tested

Guide prices for integrated appliance installation in New Cross

Typical integrated appliance installation prices for homes in New Cross, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for integrated appliance installation in New Cross
Typical projectGuide price
Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted£50–£100 each
Dishwasher or washing machine plumbed inValve, waste connection and leak check£100–£230
Built-in oven fitted, like for likeOn an existing suitable circuit£160–£320
New cooker circuit from the consumer unitOften needed for a double oven or induction hob£390–£910

Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in New Cross

Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your integrated appliance installation

  • If your New Cross home has a suspended timber floor, ask for the washing machine position to be checked for firmness before it is plumbed in.
  • Ask whether your integrated fridge is fixed-hinge or sliding-hinge before the tall housing is ordered for your New Cross kitchen, as each needs different preparation.
  • If you are replacing a single integrated appliance in your kitchen in Greater London, note the old model number, as it helps find a replacement with matching dimensions.
  • Leave the ventilation gaps the manufacturer specifies for fridges and freezers, often through the plinth or above the housing, or they work harder.

Questions about integrated appliance installation in New Cross

How much does integrated appliance installation cost in New Cross?

Guide prices in New Cross are about £50 to £100 each including VAT for fitting an integrated appliance into its housing. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of New Cross do you work in?

All of them. Our Greater London coverage takes in the whole of New Cross, including the SE14 postcode district, as well as surrounding towns such as Brockley. If you are unsure, send us your postcode.

Do built-in appliances need their own switch?

It is good practice under BS 7671 for built-in appliances to have an accessible means of isolation, for example a switched fused spur above the worktop, so they can be switched off without being pulled out. Some layouts use an accessible socket in a neighbouring cupboard instead. Manufacturers' instructions often cover this too, and the electrician confirms the right arrangement for your kitchen.

Why does an integrated dishwasher need fixing under the worktop?

Because a dishwasher can tip forward when the loaded door and racks are pulled out, and it moves slightly as it runs. It is anchored with the brackets supplied, usually to the underside of the worktop or to the side panels, then levelled so its door lines up with the drawer fronts beside it. Stone worktops usually need the side fixings rather than screws from below.

Do integrated fridges need ventilation?

Yes. Fridges and freezers give off heat as they run, so the housing must leave the airflow route the manufacturer specifies, often a gap behind the appliance and a vent in the plinth or above the housing. Without it the appliance works harder, uses more energy and may struggle to keep food cold. We check the gaps against the installation instructions before fitting.

Integrated appliance installation in neighbouring towns

Close to New Cross? We cover these nearby towns too:

Planning more than one job in New Cross?

Free survey visit

Book a free survey visit in New Cross

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price