Hob and oven installation in Woking

Why hob and oven installation for a Woking home?

Families in Woking adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.

If your Woking kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. If your home is in Woking or close by in Chertsey or Weybridge, the same survey, quote and fitting process applies.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas supply moved to a new hob position, with pipework tested and made good
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Old hob or oven disconnected safely and taken away for recycling

What does hob and oven installation cost in Woking?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does hob and oven installation cost in Woking?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£170–£460
New gas pipe run to a new hob positionPipework, testing and making good	£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Woking

You will find 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates throughout Surrey. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Do you need approval for hob and oven installation in Woking?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Practical advice for Woking homeowners

If you are replacing an old cooker with a separate hob and oven in your Woking kitchen, ask for the gas supply position and condition to be checked first.
Before buying an induction hob for your Woking home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If your Woking home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.

Questions about hob and oven installation in Woking

How much does hob and oven installation cost in Woking?

Hob and oven installation in Woking typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Woking?

Yes. We work across Woking, including the GU22 postcode district, and nearby towns such as Chertsey and Weybridge. Book a free survey visit and we will arrange a time that suits you.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Also covering nearby towns

Neighbouring towns where we offer hob and oven installation: