Kitchen Installers UK

Hob and oven installation · Greater London

Hob and oven installation in Wealdstone

Hob and oven installation for Wealdstone homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.

Guide price£160 to £1,000
Postcodes includeHA3
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Who usually needs hob and oven installation in Wealdstone?

Some people in Wealdstone buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.

A new kitchen layout in Wealdstone sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Homes right across Wealdstone are covered, as are nearby places such as Harrow, Pinner and the villages in between.

What does hob and oven installation in Wealdstone include?

The exact scope is agreed after the survey, but a typical job in Wealdstone covers:

  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

What should you budget for hob and oven installation in Wealdstone?

The figures below are guide prices for Wealdstone, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What should you budget for hob and oven installation in Wealdstone?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£200–£520
New gas pipe run to a new hob positionPipework, testing and making good£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Wealdstone and what they mean for a kitchen

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for hob and oven installation in Wealdstone?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book hob and oven installation in Wealdstone

  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
  • Before buying an induction hob for your Wealdstone home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.

Questions about hob and oven installation in Wealdstone

How much does hob and oven installation cost in Wealdstone?

Guide prices in Wealdstone are about £160 to £390 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Wealdstone?

Yes. We work across Wealdstone, including the HA3 postcode district, and nearby towns such as Harrow and Pinner. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in neighbouring towns

Neighbouring towns where we offer hob and oven installation:

Planning more than one job in Wealdstone?

Free survey visit

Book a free survey visit in Wealdstone

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price