Hob and oven installation in Brent

Is hob and oven installation right for your Brent kitchen?

Keen cooks across Greater London often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

Landlords in Greater London replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. We work throughout Brent (HA9) and across the wider Greater London area.

What we cover for hob and oven installation in Brent

Your written quote lists everything included. For hob and oven installation, that normally means:

Appliance models checked against worktop cut-outs, oven housings and existing supplies
Old hob or oven disconnected safely and taken away for recycling
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

Hob and oven installation prices in Brent

As a starting point for Brent, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Hob and oven installation prices in Brent
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for hob and oven installation in Brent?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

If you are moving the hob in your Brent kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Before buying an induction hob for your Brent home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If your Brent home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.

Questions about hob and oven installation in Brent

How much does hob and oven installation cost in Brent?

Guide prices in Brent are about £160 to £390 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Brent as well?

Yes. As well as Brent itself, we cover the rest of Greater London and nearby towns such as Wembley and Sudbury, Greater London. The process is the same wherever the kitchen is.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Nearby places we cover

Close to Brent? We cover these nearby towns too: