Hob and oven installation · Oxfordshire
Hob and oven installation in Wantage
From the survey to handover, hob and oven installation in Wantage is run by us as one job, with the fitters and trades booked in the right order.

What prompts hob and oven installation in Wantage?
Landlords in Oxfordshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.
Many households in Wantage switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. We cover all of Wantage, including the OX12 postcode district, and travel out to neighbouring towns across Oxfordshire.
What we cover for hob and oven installation in Wantage
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Old hob or oven disconnected safely and taken away for recycling
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Guide prices for hob and oven installation in Wantage
Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Wantage kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Wantage
Typical homes in this part of Oxfordshire include cotswold stone cottages, Victorian terraces, 1930s semis and new-build estates. Oxford's Victorian terraces often have a narrow galley in the back addition, while stone cottages in market towns and villages tend to have small, low-ceilinged kitchens.
City streets with permit parking and narrow village lanes can both slow deliveries, so parking and the carry route for worktops are checked at the survey. Water across Oxfordshire is hard, so limescale on taps, kettles and boiling water taps is common, and a filter is worth planning in.
Building regulations, electrics and gas in Wantage
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Oxford's many listed buildings and conservation areas, along with Cotswold stone villages, may need consent before a new vent is cut or historic features are removed.
Tips before you start
- If you are replacing an old cooker with a separate hob and oven in your Wantage kitchen, ask for the gas supply position and condition to be checked first.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Before buying an induction hob for your Wantage home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
Questions about hob and oven installation in Wantage
How much does hob and oven installation cost in Wantage?
Hob and oven installation in Wantage typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Wantage before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Wantage. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Hob and oven installation near Wantage
The same service is available a short drive from Wantage, including:
- Hob and oven installation in Didcot
- Hob and oven installation in Faringdon
- Hob and oven installation in Abingdon
- Hob and oven installation in Oxford
- Hob and oven installation in Newbury
- Hob and oven installation in Witney
- Hob and oven installation across Oxfordshire
