Hob and oven installation in Solihull

Thinking about hob and oven installation in Solihull?

Families in Solihull adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.

If the oven in your Solihull kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. Our West Midlands coverage reaches every part of Solihull (B91) and out towards Shirley.

What does hob and oven installation in Solihull include?

Here is what usually goes into hob and oven installation, adjusted to your Solihull kitchen after we have measured it:

Old hob or oven disconnected safely and taken away for recycling
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas supply moved to a new hob position, with pipework tested and made good
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Induction and ceramic hobs wired to a suitable cooker circuit and tested

Guide prices for hob and oven installation in Solihull

Typical hob and oven installation prices for homes in Solihull, including VAT and adjusted for the West Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the West Midlands are broadly in line with UK averages.

Guide prices for hob and oven installation in Solihull
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£300
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£250
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£400
New gas pipe run to a new hob positionPipework, testing and making good	£250–£800

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Solihull homes

Across the West Midlands you will often find Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes, and each shapes the kitchen differently. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen. Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter.

Building regulations, electrics and gas in Solihull

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Before you book hob and oven installation in Solihull

Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in the West Midlands can be cut correctly by the fabricator.
If your Solihull home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Solihull

How much does hob and oven installation cost in Solihull?

Guide prices in Solihull are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Solihull as well?

Yes. As well as Solihull itself, we cover the rest of the West Midlands and nearby towns such as Shirley and Birmingham. The process is the same wherever the kitchen is.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Nearby places we cover

Neighbouring towns where we offer hob and oven installation: