Kitchen Installers UK

Hob and oven installation · West Midlands

Hob and oven installation in Smethwick

If you live in Smethwick and need hob and oven installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£120 to £800
Postcodes includeB66
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

What prompts hob and oven installation in Smethwick?

Many households in Smethwick switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Keen cooks across the West Midlands often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. Our West Midlands coverage reaches every part of Smethwick (B66) and out towards West Bromwich.

What is in a typical job?

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Old hob or oven disconnected safely and taken away for recycling
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Built-in single and double ovens fixed into housings with their ventilation gaps

How much does hob and oven installation cost in Smethwick?

As a starting point for Smethwick, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. For the West Midlands, these ranges are close to the national figures.

How much does hob and oven installation cost in Smethwick?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£120–£300
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£120–£250
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£150–£400
New gas pipe run to a new hob positionPipework, testing and making good£250–£800

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Smethwick and what they mean for a kitchen

Across the West Midlands you will often find Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes, and each shapes the kitchen differently. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter. Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen.

What rules apply to hob and oven installation in Smethwick?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Before you book hob and oven installation in Smethwick

  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in the West Midlands can be cut correctly by the fabricator.
  • Before buying an induction hob for your Smethwick home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Smethwick

How much does hob and oven installation cost in Smethwick?

Guide prices in Smethwick are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Smethwick?

Yes. We work across Smethwick, including the B66 postcode district, and nearby towns such as West Bromwich and Birmingham. Book a free survey visit and we will arrange a time that suits you.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Also covering nearby towns

Neighbouring towns where we offer hob and oven installation:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Smethwick

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price