Hob and oven installation · Scotland
Hob and oven installation in the Scottish Borders
Our hob and oven installation work covers the whole of the Scottish Borders, including Hawick, Galashiels and Peebles.
Thinking about hob and oven installation in the Scottish Borders?
Landlords in the Scottish Borders replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.
If your Scottish Borders kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
What does hob and oven installation in the Scottish Borders include?
Here is what usually goes into hob and oven installation, adjusted to your Scottish Borders kitchen after we have measured it:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in the Scottish Borders?
These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£280 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£240 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£380 |
| New gas pipe run to a new hob positionPipework, testing and making good | £240–£750 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across the Scottish Borders
Across the Scottish Borders you will often find stone mill-town terraces, Victorian villas, farm cottages and post-war council-built houses, and each shapes the kitchen differently. Stone terraces in Hawick and Galashiels often have a small kitchen at the back, while Victorian villas in Peebles and Kelso tend to have larger separate kitchens.
The Scottish Borders generally have soft mains water, though rural homes on private supplies may need testing and filtering. Rural roads and farm tracks can be narrow for delivery lorries, and older town centres may have limited parking, so delivery is planned in advance.
Stone terraces in the mill towns usually have small rooms and thick walls that suit a galley or L-shaped layout. Farm cottages are often off the gas grid, so cooking may be planned around induction, LPG or an oil-fired range.
Rules for hob and oven installation in the Scottish Borders
In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.
Older Borders towns often have conservation areas and listed buildings, so a new external vent or changes to historic features may need consent.
Before you start
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If you are moving the hob in your Scottish Borders kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Questions about hob and oven installation in the Scottish Borders
How much does hob and oven installation cost in the Scottish Borders?
For connecting a gas hob to an existing supply, budget around £110 to £280 including VAT in the Scottish Borders. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of the Scottish Borders?
Yes. We carry out hob and oven installation across the Scottish Borders, including Hawick, Galashiels, Peebles and Kelso. Every job starts with a free survey visit and an itemised written quote.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Hob and oven installation in towns across the Scottish Borders
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Hawick
- Hob and oven installation in Galashiels
- Hob and oven installation in Peebles
- Hob and oven installation in Kelso