Hob and oven installation · Greater London
Hob and oven installation in New Malden
Need hob and oven installation in New Malden? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.
Who usually needs hob and oven installation in New Malden?
A new kitchen layout in New Malden sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
Families in New Malden adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. Kitchens in every part of New Malden are covered, and the survey visit is free wherever you are in Greater London.
What we cover for hob and oven installation in New Malden
Here is what usually goes into hob and oven installation, adjusted to your New Malden kitchen after we have measured it:
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Gas supply moved to a new hob position, with pipework tested and made good
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in New Malden?
The figures below are guide prices for New Malden, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £160–£390 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £160–£320 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £200–£520 |
| New gas pipe run to a new hob positionPipework, testing and making good | £320–£1,000 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around New Malden
You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
What rules apply to hob and oven installation in New Malden?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Getting the most from your hob and oven installation
- If your New Malden home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in New Malden
How much does hob and oven installation cost in New Malden?
For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in New Malden. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.
Can you measure up in New Malden before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in New Malden. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Hob and oven installation in neighbouring towns
Neighbouring towns where we offer hob and oven installation:
- Hob and oven installation in Worcester Park
- Hob and oven installation in Surbiton
- Hob and oven installation in Morden
- Hob and oven installation in Wimbledon
- Hob and oven installation in Hook
- Hob and oven installation in Chessington
- Hob and oven installation across Greater London