Hob and oven installation · Scotland
Hob and oven installation in Glasgow
Our hob and oven installation work covers the whole of Glasgow, and we also work in neighbouring Dunbartonshire and Renfrewshire and Inverclyde.
Why hob and oven installation for a Glasgow home?
Many households in Glasgow switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.
If your Glasgow kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
What does hob and oven installation in Glasgow include?
The exact scope is agreed after the survey, but a typical job in Glasgow covers:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Glasgow?
These guide ranges include VAT at 20% and are adjusted for prices in Edinburgh and Glasgow. We confirm your price in writing after a free survey visit. Costs in Edinburgh and Glasgow sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across Glasgow
The housing mix across Glasgow includes sandstone tenement flats, Victorian terraces and villas, four-in-a-block flats and post-war high-rise flats, so no two kitchen fits are quite alike. Tenement flats often have a kitchen off the hall, sometimes with an old bed recess, while four-in-a-block flats tend to have a narrow galley at the back.
Glasgow's mains water is soft, much of it from Loch Katrine, so limescale is rarely a problem and taps and boiling water taps stay cleaner. Tenement closes and common stairs mean carrying units by hand, often to upper floors, and permit parking near the door may need arranging for delivery day.
Tenement kitchens often have high ceilings and a former bed recess, which can take tall units, a fridge freezer or a small dining nook. Four-in-a-block flats and ex-council houses more often need a full refit with new wiring, better storage and a more practical layout.
Rules for hob and oven installation in Glasgow
In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.
Many of the city's tenement streets, including much of the West End, are conservation areas, so a new external vent may need consent, and common walls involve neighbours.
Before you start
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If you are moving the hob in your Glasgow kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Questions about hob and oven installation in Glasgow
How much does hob and oven installation cost in Glasgow?
Hob and oven installation in Glasgow typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in Edinburgh and Glasgow. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Glasgow?
Yes. We carry out hob and oven installation across Glasgow. Every job starts with a free survey visit and an itemised written quote.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.