Flat-pack kitchen fitting in Didcot

Why do people in Didcot choose flat-pack kitchen fitting?

A Didcot kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.

Flat-pack is a common choice in Didcot when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. Didcot sits about 10 miles south of Oxford, and our Oxfordshire coverage takes in everything in between.

What is in a typical job?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Didcot kitchen after we have measured it:

Back panels fitted fully into their grooves or fixed as the instructions require
Free survey visit to check the plan, the boxes and the room
Wall units hung on hanging rails or brackets fixed securely into the wall
Base units levelled on adjustable legs and fixed to the wall and to each other
Laminate worktops cut and jointed, with cut edges sealed around the sink
Carcasses assembled on site on a flat surface and checked for square

Guide prices for flat-pack kitchen fitting in Didcot

The figures below are guide prices for Didcot, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for flat-pack kitchen fitting in Didcot
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Didcot and what they mean for a kitchen

You will find cotswold stone cottages, Victorian terraces, 1930s semis and new-build estates throughout Oxfordshire. Oxford's Victorian terraces often have a narrow galley in the back addition, while stone cottages in market towns and villages tend to have small, low-ceilinged kitchens.

City streets with permit parking and narrow village lanes can both slow deliveries, so parking and the carry route for worktops are checked at the survey. Water across Oxfordshire is hard, so limescale on taps, kettles and boiling water taps is common, and a filter is worth planning in.

What rules apply to flat-pack kitchen fitting in Didcot?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Oxford's many listed buildings and conservation areas, along with Cotswold stone villages, may need consent before a new vent is cut or historic features are removed.

Tips before you start

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Set aside a room next to the kitchen in your Didcot home for assembly, with enough floor space to lay a tall larder carcass down flat.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Didcot

How much does flat-pack kitchen fitting cost in Didcot?

Guide prices in Didcot are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Didcot?

Yes. We work across Didcot, including the OX11 postcode district, and nearby towns such as Abingdon and Wantage. Book a free survey visit and we will arrange a time that suits you.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Also covering nearby towns

Neighbouring towns where we offer flat-pack kitchen fitting: