Flat-pack kitchen fitting in Tavistock

Is flat-pack kitchen fitting right for your Tavistock kitchen?

If you have bought a flat-pack kitchen for your Tavistock home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

Some people in Devon start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part. Kitchens in every part of Tavistock are covered, and the survey visit is free wherever you are in Devon.

What does flat-pack kitchen fitting in Tavistock include?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Tavistock kitchen after we have measured it:

Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Panels, plinths, sink, tap and appliance connections to existing points
Carcasses assembled on site on a flat surface and checked for square
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up

Flat-pack kitchen fitting prices in Tavistock

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Tavistock kitchen. Prices across the South West are broadly in line with UK averages.

Flat-pack kitchen fitting prices in Tavistock
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Devon includes cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, so no two kitchen fits are quite alike. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Regulations for kitchen work in Tavistock

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Planning ahead

If the flat-pack sink base in your Tavistock kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Tavistock

How much does flat-pack kitchen fitting cost in Tavistock?

For a small flat-pack kitchen, built and fitted, budget around £1,900 to £3,100 including VAT in Tavistock. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you work near Tavistock as well?

Yes. As well as Tavistock itself, we cover the rest of Devon and nearby towns such as Saltash and Launceston. The process is the same wherever the kitchen is.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Also covering nearby towns

The same service is available a short drive from Tavistock, including: