Flat-pack kitchen fitting in Plymstock

When does flat-pack kitchen fitting make sense in Plymstock?

If you have bought a flat-pack kitchen for your Plymstock home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

Flat-pack is a common choice in Plymstock when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. Homes right across Plymstock are covered, as are nearby places such as Plymouth, Saltash and the villages in between.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Plymstock covers:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require
Free survey visit to check the plan, the boxes and the room
Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Laminate worktops cut and jointed, with cut edges sealed around the sink

Guide prices for flat-pack kitchen fitting in Plymstock

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Plymstock kitchen. Prices across the South West are broadly in line with UK averages.

Guide prices for flat-pack kitchen fitting in Plymstock
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Plymstock?

Typical homes in this part of Devon include cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

Building regulations, electrics and gas in Plymstock

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Tips before you start

If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
If your Plymstock home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If the flat-pack sink base in your Plymstock kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Allow extra time on site: a small flat-pack kitchen typically takes four to six days, against three to five for rigid units.

Questions about flat-pack kitchen fitting in Plymstock

How much does flat-pack kitchen fitting cost in Plymstock?

Flat-pack kitchen fitting in Plymstock typically costs £1,900 to £3,100 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Plymstock do you work in?

All of them. Our Devon coverage takes in the whole of Plymstock, including the PL9 postcode district, as well as surrounding towns such as Plymouth. If you are unsure, send us your postcode.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Flat-pack kitchen fitting in neighbouring towns

Close to Plymstock? We cover these nearby towns too: