Flat-pack kitchen fitting · Dorset
Flat-pack kitchen fitting in Swanage
Homeowners and landlords in Swanage can book us for flat-pack kitchen fitting: flat-pack kitchen units built square on site, then fitted, levelled and finished like rigid units.
What prompts flat-pack kitchen fitting in Swanage?
If your kitchen is in a Swanage flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.
A Swanage kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Our Dorset coverage reaches every part of Swanage (BH19) and out towards Poole.
What does the job involve?
The exact scope is agreed after the survey, but a typical job in Swanage covers:
- Carcasses assembled on site on a flat surface and checked for square
- Laminate worktops cut and jointed, with cut edges sealed around the sink
- Panels, plinths, sink, tap and appliance connections to existing points
- Back panels fitted fully into their grooves or fixed as the instructions require
- Free survey visit to check the plan, the boxes and the room
- Base units levelled on adjustable legs and fixed to the wall and to each other
How much does flat-pack kitchen fitting cost in Swanage?
The figures below are guide prices for Swanage, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be | £1,900–£3,100 |
| Medium flat-pack kitchen, built and fittedAs above | £2,900–£4,300 |
| Large flat-pack kitchen with tall units, built and fittedAs above | £4,100–£5,700 |
Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.
Local homes and their kitchens
In and around Swanage, homes range across thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.
Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.
Do you need approval for flat-pack kitchen fitting in Swanage?
Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.
Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.
Before you book flat-pack kitchen fitting in Swanage
- If the flat-pack sink base in your Swanage kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
- Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
- If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
- Allow extra time on site: a small flat-pack kitchen typically takes four to six days, against three to five for rigid units.
Questions about flat-pack kitchen fitting in Swanage
How much does flat-pack kitchen fitting cost in Swanage?
Guide prices in Swanage are about £1,900 to £3,100 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of Swanage?
Yes. We work across Swanage, including the BH19 postcode district, and nearby towns such as Poole and Bournemouth. Book a free survey visit and we will arrange a time that suits you.
How do you make sure flat-pack cabinets are square?
Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.
What is the difference between flat-pack and rigid kitchen units?
Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.
How do you protect a flat-pack sink unit from water?
Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.
Also covering nearby towns
We also carry out flat-pack kitchen fitting in these towns near Swanage:
- Flat-pack kitchen fitting in Poole
- Flat-pack kitchen fitting in Bournemouth
- Flat-pack kitchen fitting in Christchurch
- Flat-pack kitchen fitting in New Milton
- Flat-pack kitchen fitting in Ringwood
- Flat-pack kitchen fitting in Blandford Forum
- Flat-pack kitchen fitting across Dorset