Flat-pack kitchen fitting in New Milton

Why flat-pack kitchen fitting for a New Milton home?

Landlords in Hampshire sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.

If you are fitting a utility room as well as a kitchen in New Milton, flat-pack units for both rooms can be built and fitted as part of the same job. New Milton sits about 15 miles south-west of Southampton, and our Hampshire coverage takes in everything in between.

What is in a typical job?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your New Milton kitchen after we have measured it:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Carcasses assembled on site on a flat surface and checked for square
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other

What does flat-pack kitchen fitting cost in New Milton?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does flat-pack kitchen fitting cost in New Milton?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Regulations for kitchen work in New Milton

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for New Milton homeowners

If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Count the boxes against the delivery note when your flat-pack kitchen arrives in New Milton; orders can run to dozens of boxes and one short box can stall a fit.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in New Milton

How much does flat-pack kitchen fitting cost in New Milton?

Guide prices in New Milton are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in New Milton before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in New Milton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Also covering nearby towns

The same service is available a short drive from New Milton, including: