Flat-pack kitchen fitting in Stratford

Who usually needs flat-pack kitchen fitting in Stratford?

First-time buyers in Stratford often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

If you have bought a flat-pack kitchen for your Stratford home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. We cover all of Stratford, including the E15 postcode district, and travel out to neighbouring towns across Greater London.

What does the job involve?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Stratford kitchen after we have measured it:

Panels, plinths, sink, tap and appliance connections to existing points
Base units levelled on adjustable legs and fixed to the wall and to each other
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Free survey visit to check the plan, the boxes and the room
Wall units hung on hanging rails or brackets fixed securely into the wall

Guide prices for flat-pack kitchen fitting in Stratford

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for flat-pack kitchen fitting in Stratford
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Stratford and what they mean for a kitchen

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to flat-pack kitchen fitting in Stratford?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

If your Stratford home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
If the flat-pack sink base in your Stratford kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Stratford

How much does flat-pack kitchen fitting cost in Stratford?

For a small flat-pack kitchen, built and fitted, budget around £2,300 to £3,900 including VAT in Stratford. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Stratford as well?

Yes. As well as Stratford itself, we cover the rest of Greater London and nearby towns such as West Ham and Bow. The process is the same wherever the kitchen is.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Nearby places we cover

Neighbouring towns where we offer flat-pack kitchen fitting: