Flat-pack kitchen fitting in Bow

Why do people in Bow choose flat-pack kitchen fitting?

If you are fitting a utility room as well as a kitchen in Bow, flat-pack units for both rooms can be built and fitted as part of the same job.

Flat-pack is a common choice in Bow when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. Our Greater London coverage reaches every part of Bow (E3) and out towards Stratford.

What we cover for flat-pack kitchen fitting in Bow

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Bow kitchen after we have measured it:

Carcasses assembled on site on a flat surface and checked for square
Wall units hung on hanging rails or brackets fixed securely into the wall
Laminate worktops cut and jointed, with cut edges sealed around the sink
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Back panels fitted fully into their grooves or fixed as the instructions require
Free survey visit to check the plan, the boxes and the room

Flat-pack kitchen fitting prices in Bow

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Flat-pack kitchen fitting prices in Bow
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Bow

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Bow

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

If the flat-pack sink base in your Bow kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.

Questions about flat-pack kitchen fitting in Bow

How much does flat-pack kitchen fitting cost in Bow?

Flat-pack kitchen fitting in Bow typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Bow?

Yes. We work across Bow, including the E3 postcode district, and nearby towns such as Stratford and Limehouse. Book a free survey visit and we will arrange a time that suits you.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Nearby places we cover

Neighbouring towns where we offer flat-pack kitchen fitting: