Flat-pack kitchen fitting in South Norwood

Thinking about flat-pack kitchen fitting in South Norwood?

Landlords in Greater London sometimes choose flat-pack kitchens for rented homes, because matching doors and replacement parts can often be bought again later if a unit is damaged.

A South Norwood kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Homes right across South Norwood are covered, as are nearby places such as Croydon, Norbury and the villages in between.

What does flat-pack kitchen fitting in South Norwood include?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your South Norwood kitchen after we have measured it:

Panels, plinths, sink, tap and appliance connections to existing points
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Base units levelled on adjustable legs and fixed to the wall and to each other
Carcasses assembled on site on a flat surface and checked for square
Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink

What does flat-pack kitchen fitting cost in South Norwood?

As a starting point for South Norwood, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What does flat-pack kitchen fitting cost in South Norwood?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around South Norwood and what they mean for a kitchen

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for flat-pack kitchen fitting in South Norwood?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Wall unit fixings need to suit your walls, because plasterboard, old lime plaster and solid brick each call for a different approach.

Questions about flat-pack kitchen fitting in South Norwood

How much does flat-pack kitchen fitting cost in South Norwood?

Guide prices in South Norwood are about £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near South Norwood as well?

Yes. As well as South Norwood itself, we cover the rest of Greater London and nearby towns such as Croydon and Norbury. The process is the same wherever the kitchen is.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Flat-pack kitchen fitting in neighbouring towns

We also carry out flat-pack kitchen fitting in these towns near South Norwood: