Flat-pack kitchen fitting in Hove

Thinking about flat-pack kitchen fitting in Hove?

First-time buyers in Hove often choose a flat-pack range to replace a worn kitchen soon after moving in, keeping money aside for flooring and decorating.

If your kitchen is in a Hove flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself. Homes right across Hove are covered, as are nearby places such as Brighton, Portslade and the villages in between.

What does the job involve?

After the survey visit we write the scope down. For flat-pack kitchen fitting in Hove it usually covers:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Base units levelled on adjustable legs and fixed to the wall and to each other
Carcasses assembled on site on a flat surface and checked for square
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room

What does flat-pack kitchen fitting cost in Hove?

Typical flat-pack kitchen fitting prices for homes in Hove, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does flat-pack kitchen fitting cost in Hove?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Hove

The housing mix across East Sussex includes Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning. East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering.

Regulations for kitchen work in Hove

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Worth knowing before the fit

If your Hove home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
If the flat-pack sink base in your Hove kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Hove

How much does flat-pack kitchen fitting cost in Hove?

Guide prices in Hove are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Hove before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Hove. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Flat-pack kitchen fitting in neighbouring towns

Neighbouring towns where we offer flat-pack kitchen fitting: