Flat-pack kitchen fitting in Clevedon

Why do people in Clevedon choose flat-pack kitchen fitting?

Flat-pack is a common choice in Clevedon when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets.

A Clevedon kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Kitchens in every part of Clevedon are covered, and the survey visit is free wherever you are in Somerset.

What is included in the work?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Clevedon kitchen after we have measured it:

Base units levelled on adjustable legs and fixed to the wall and to each other
Free survey visit to check the plan, the boxes and the room
Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up

What does flat-pack kitchen fitting cost in Clevedon?

Typical flat-pack kitchen fitting prices for homes in Clevedon, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.

What does flat-pack kitchen fitting cost in Clevedon?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Clevedon, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

What rules apply to flat-pack kitchen fitting in Clevedon?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Planning ahead

If the flat-pack sink base in your Clevedon kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
If your Clevedon home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Clevedon

How much does flat-pack kitchen fitting cost in Clevedon?

For a small flat-pack kitchen, built and fitted, budget around £1,900 to £3,100 including VAT in Clevedon. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Clevedon do you work in?

All of them. Our Somerset coverage takes in the whole of Clevedon, including the BS21 postcode district, as well as surrounding towns such as Nailsea. If you are unsure, send us your postcode.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Flat-pack kitchen fitting near Clevedon

We also carry out flat-pack kitchen fitting in these towns near Clevedon: