Flat-pack kitchen fitting in Burnham-on-Sea

Is flat-pack kitchen fitting right for your Burnham-on-Sea kitchen?

Some people in Somerset start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part.

If your kitchen is in a Burnham-on-Sea flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself. We cover all of Burnham-on-Sea, including the TA8 postcode district, and travel out to neighbouring towns across Somerset.

What is included in the work?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Burnham-on-Sea kitchen after we have measured it:

Carcasses assembled on site on a flat surface and checked for square
Wall units hung on hanging rails or brackets fixed securely into the wall
Free survey visit to check the plan, the boxes and the room
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Laminate worktops cut and jointed, with cut edges sealed around the sink
Base units levelled on adjustable legs and fixed to the wall and to each other

Guide prices for flat-pack kitchen fitting in Burnham-on-Sea

The figures below are guide prices for Burnham-on-Sea, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Costs in the South West sit close to the national guide.

Guide prices for flat-pack kitchen fitting in Burnham-on-Sea
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

House types around Burnham-on-Sea and what they mean for a kitchen

The housing mix across Somerset includes Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, so no two kitchen fits are quite alike. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Burnham-on-Sea

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Practical advice for Burnham-on-Sea homeowners

Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Set aside a room next to the kitchen in your Burnham-on-Sea home for assembly, with enough floor space to lay a tall larder carcass down flat.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Allow extra time on site: a small flat-pack kitchen typically takes four to six days, against three to five for rigid units.

Questions about flat-pack kitchen fitting in Burnham-on-Sea

How much does flat-pack kitchen fitting cost in Burnham-on-Sea?

Guide prices in Burnham-on-Sea are about £1,900 to £3,100 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Burnham-on-Sea as well?

Yes. As well as Burnham-on-Sea itself, we cover the rest of Somerset and nearby towns such as Weston-super-Mare and Bridgwater. The process is the same wherever the kitchen is.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Burnham-on-Sea: