Flat-pack kitchen fitting in Chiswick

Is flat-pack kitchen fitting right for your Chiswick kitchen?

If your kitchen is in a Chiswick flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself.

Flat-pack is a common choice in Chiswick when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. Our Greater London coverage reaches every part of Chiswick (W4) and out towards Acton.

What does the job involve?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Chiswick kitchen after we have measured it:

Panels, plinths, sink, tap and appliance connections to existing points
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Base units levelled on adjustable legs and fixed to the wall and to each other
Carcasses assembled on site on a flat surface and checked for square
Laminate worktops cut and jointed, with cut edges sealed around the sink
Back panels fitted fully into their grooves or fixed as the instructions require

What does flat-pack kitchen fitting cost in Chiswick?

Typical flat-pack kitchen fitting prices for homes in Chiswick, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What does flat-pack kitchen fitting cost in Chiswick?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Chiswick

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for flat-pack kitchen fitting in Chiswick?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Chiswick homeowners

Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
If your Chiswick home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Clear a space next to the kitchen for assembly; carcasses need a flat floor and room to be checked for square before fitting.

Questions about flat-pack kitchen fitting in Chiswick

How much does flat-pack kitchen fitting cost in Chiswick?

Flat-pack kitchen fitting in Chiswick typically costs £2,300 to £3,900 including VAT for a small flat-pack kitchen, built and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Chiswick do you work in?

All of them. Our Greater London coverage takes in the whole of Chiswick, including the W4 postcode district, as well as surrounding towns such as Acton. If you are unsure, send us your postcode.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Flat-pack kitchen fitting in neighbouring towns

The same service is available a short drive from Chiswick, including: