Fit-only kitchen fitting in Tooting

When does fit-only kitchen fitting make sense in Tooting?

People in Greater London who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened.

Some Tooting households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. Our Greater London coverage reaches every part of Tooting (SW17) and out towards Streatham.

What is included in the work?

Your written quote lists everything included. For fit-only kitchen fitting, that normally means:

Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Free survey visit to check your plan, the room and the service positions
Delivery checked against the plan and delivery note before fitting starts
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Laminate or wood worktops cut, jointed, sealed and fixed down

Fit-only kitchen fitting prices in Tooting

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Fit-only kitchen fitting prices in Tooting
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£2,000–£3,200
Medium kitchen (10–15 units)As above	£3,200–£4,600
Large kitchen (15+ units, island or tall larders)As above	£4,600–£5,800
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£230–£360 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Tooting?

In and around Tooting, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Tooting

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Book the fit for a date after the full delivery has arrived in Greater London; a split delivery is a common reason for a fit stalling halfway.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Before your kitchen is delivered to your Tooting home, clear a dry room to store the boxes flat, away from damp garages and outbuildings.
If you chose stone worktops, the stone supplier templates and fits them after the base units are fixed, usually one to two weeks later.

Questions about fit-only kitchen fitting in Tooting

How much does fit-only kitchen fitting cost in Tooting?

For a small kitchen of 5 to 10 units, budget around £2,000 to £3,200 including VAT in Tooting. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Tooting do you work in?

All of them. Our Greater London coverage takes in the whole of Tooting, including the SW17 postcode district, as well as surrounding towns such as Streatham. If you are unsure, send us your postcode.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

Fit-only kitchen fitting in neighbouring towns

We also carry out fit-only kitchen fitting in these towns near Tooting: