Fit-only kitchen fitting in Stockton-on-Tees

Thinking about fit-only kitchen fitting in Stockton-on-Tees?

Plenty of homeowners in Stockton-on-Tees buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked.

People in County Durham who have bought from a trade counter often want a fitter who will check the plan against the room before any boxes are opened. We cover all of Stockton-on-Tees, including the TS19 postcode district, and travel out to neighbouring towns across County Durham.

What we cover for fit-only kitchen fitting in Stockton-on-Tees

The exact scope is agreed after the survey, but a typical job in Stockton-on-Tees covers:

Free survey visit to check your plan, the room and the service positions
Sink, tap and appliances connected to the existing water, waste and power points
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Laminate or wood worktops cut, jointed, sealed and fixed down
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Delivery checked against the plan and delivery note before fitting starts

Guide prices for fit-only kitchen fitting in Stockton-on-Tees

As a starting point for Stockton-on-Tees, these ranges include VAT at 20% and allow for typical labour costs in the North East. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for fit-only kitchen fitting in Stockton-on-Tees
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,200
Medium kitchen (10–15 units)As above	£2,200–£3,200
Large kitchen (15+ units, island or tall larders)As above	£3,200–£4,000
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£160–£250 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Stockton-on-Tees

In and around Stockton-on-Tees, homes range across colliery terraces, 1930s semis, post-war council-built houses and stone-built village houses. Colliery terraces often have a small back kitchen in the rear offshoot, while 1930s semis usually have a square kitchen that can open into the dining room.

Hardness varies across County Durham and the Tees area, from fairly soft to hard in places, so check with your water supplier before choosing a filter. Older terraced streets often have back lanes that help with deliveries, but rear yards and narrow gates may still limit how long worktops get in.

Do you need approval for fit-only kitchen fitting in Stockton-on-Tees?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Listed homes and houses in conservation areas, such as the historic centre of Durham, may need consent for a new external vent or for removing original features.

Tips before you start

Photograph each pallet and any damaged box as it arrives at your Stockton-on-Tees address, and note the damage on the delivery note before the driver leaves.
Book the fit for a date after the full delivery has arrived in County Durham; a split delivery is a common reason for a fit stalling halfway.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Stockton-on-Tees

How much does fit-only kitchen fitting cost in Stockton-on-Tees?

Fit-only kitchen fitting in Stockton-on-Tees typically costs £1,400 to £2,200 including VAT for a small kitchen of 5 to 10 units, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Stockton-on-Tees before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Stockton-on-Tees. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Also covering nearby towns

We also carry out fit-only kitchen fitting in these towns near Stockton-on-Tees: