Cooker hood installation in Stockton-on-Tees

What prompts cooker hood installation in Stockton-on-Tees?

Homeowners in Stockton-on-Tees adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

A new kitchen in a Stockton-on-Tees home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. We cover all of Stockton-on-Tees, including the TS19 postcode district, and travel out to neighbouring towns across County Durham.

What is included in the work?

Your written quote lists everything included. For cooker hood installation, that normally means:

Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Hood fixed at the height set by the hood and hob manufacturers
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

Guide prices for cooker hood installation in Stockton-on-Tees

Typical cooker hood installation prices for homes in Stockton-on-Tees, including VAT and adjusted for the North East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for cooker hood installation in Stockton-on-Tees
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille	£270–£810
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£270–£570
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£270

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Across County Durham you will often find colliery terraces, 1930s semis, post-war council-built houses and stone-built village houses, and each shapes the kitchen differently. Colliery terraces often have a small back kitchen in the rear offshoot, while 1930s semis usually have a square kitchen that can open into the dining room.

Older terraced streets often have back lanes that help with deliveries, but rear yards and narrow gates may still limit how long worktops get in. Hardness varies across County Durham and the Tees area, from fairly soft to hard in places, so check with your water supplier before choosing a filter.

Building regulations, electrics and gas in Stockton-on-Tees

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed homes and houses in conservation areas, such as the historic centre of Durham, may need consent for a new external vent or for removing original features.

Before you book cooker hood installation in Stockton-on-Tees

If you live in a flat in County Durham, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
If your Stockton-on-Tees home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Stockton-on-Tees

How much does cooker hood installation cost in Stockton-on-Tees?

Guide prices in Stockton-on-Tees are about £110 to £220 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Stockton-on-Tees as well?

Yes. As well as Stockton-on-Tees itself, we cover the rest of County Durham and nearby towns such as Billingham and Thornaby-on-Tees. The process is the same wherever the kitchen is.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Cooker hood installation near Stockton-on-Tees

We also carry out cooker hood installation in these towns near Stockton-on-Tees: