Fit-only kitchen fitting in Stafford

When does fit-only kitchen fitting make sense in Stafford?

If you have chosen stone worktops for a Stafford kitchen, fit only gets the base units level and fixed so they are ready when the fabricator arrives to template.

Plenty of homeowners in Stafford buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked. If your home is in Stafford or close by in Rugeley or Cannock, the same survey, quote and fitting process applies.

What does the job involve?

After the survey visit we write the scope down. For fit-only kitchen fitting in Stafford it usually covers:

Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
Sink, tap and appliances connected to the existing water, waste and power points
Free survey visit to check your plan, the room and the service positions
Base, wall and tall units positioned, levelled on their legs and fixed to the wall
Delivery checked against the plan and delivery note before fitting starts

Fit-only kitchen fitting prices in Stafford

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. Prices across the West Midlands are broadly in line with UK averages.

Fit-only kitchen fitting prices in Stafford
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,500
Medium kitchen (10–15 units)As above	£2,500–£3,500
Large kitchen (15+ units, island or tall larders)As above	£3,500–£4,500
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£180–£280 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Stafford?

Across Staffordshire you will often find Victorian terraces, 1930s semis, post-war estate houses and moorland stone cottages, and each shapes the kitchen differently. Terraces in Stoke-on-Trent often have a small kitchen in the rear offshoot, while 1930s semis and estate houses tend to have a compact kitchen beside the dining room.

Water across much of Staffordshire is moderately hard to hard, so limescale on taps and boiling water taps is worth planning for. Terraced streets with limited parking and narrow moorland lanes in the north of the county can complicate deliveries, so vehicle size and timing are planned ahead.

Do you need approval for fit-only kitchen fitting in Stafford?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Homes within the Staffordshire part of the Peak District National Park, listed buildings and conservation areas may need consent for new vents or alterations to historic features.

Getting the most from your fit-only kitchen fitting

Leave appliance manuals in their boxes; they give the housing sizes and ventilation gaps needed to install each appliance correctly in your Stafford kitchen.
Photograph each pallet and any damaged box as it arrives at your Stafford address, and note the damage on the delivery note before the driver leaves.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.

Questions about fit-only kitchen fitting in Stafford

How much does fit-only kitchen fitting cost in Stafford?

Guide prices in Stafford are about £1,500 to £2,500 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Stafford do you work in?

All of them. Our Staffordshire coverage takes in the whole of Stafford, including the ST16 postcode district, as well as surrounding towns such as Rugeley. If you are unsure, send us your postcode.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Nearby places we cover

Neighbouring towns where we offer fit-only kitchen fitting: