Fit-only kitchen fitting in Irvine

Why fit-only kitchen fitting for an Irvine home?

If you are renovating a house in Irvine yourself, buying the kitchen direct and paying only for fitting keeps the choice of units and the budget in your hands.

Plenty of homeowners in Irvine buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked. Kitchens in every part of Irvine are covered, and the survey visit is free wherever you are in Ayrshire.

What does the job involve?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Irvine kitchen after we have measured it:

Laminate or wood worktops cut, jointed, sealed and fixed down
Delivery checked against the plan and delivery note before fitting starts
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Free survey visit to check your plan, the room and the service positions
Sink, tap and appliances connected to the existing water, waste and power points

Guide prices for fit-only kitchen fitting in Irvine

As a starting point for Irvine, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for fit-only kitchen fitting in Irvine
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,400–£2,400
Medium kitchen (10–15 units)As above	£2,400–£3,300
Large kitchen (15+ units, island or tall larders)As above	£3,300–£4,200
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£260 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Kitchens in homes around Irvine

The housing mix across Ayrshire includes red sandstone villas, sandstone tenement flats, four-in-a-block flats and post-war council-built houses, so no two kitchen fits are quite alike. Four-in-a-block flats and ex-council houses often have a small galley kitchen, while sandstone villas in Ayr tend to have a larger kitchen with a separate dining room.

Ayrshire's mains water is soft, so limescale is rarely a problem and taps, sinks and boiling water taps tend to stay cleaner. Upper four-in-a-block flats usually have their own stair, and coastal towns can have limited parking, so the route for long worktops is checked at the survey.

Do you need approval for fit-only kitchen fitting in Irvine?

In Scotland, fitting kitchen units you have bought does not need a building warrant, and nor does most electrical work in a house, but the work must still meet the building standards and BS 7671. Ask the electrician for an Electrical Installation Certificate or Minor Works Certificate. Gas hobs and cookers must be connected by a Gas Safe registered engineer, and the kitchen should keep extract ventilation that meets standard 3.14.

Listed sandstone villas and conservation areas in older town centres may need consent for a new external vent, and flat owners may need neighbours' agreement for shared walls.

Worth knowing before the fit

Photograph each pallet and any damaged box as it arrives at your Irvine address, and note the damage on the delivery note before the driver leaves.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
If you buy a worktop for an Irvine kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Irvine

How much does fit-only kitchen fitting cost in Irvine?

Guide prices in Irvine are about £1,400 to £2,400 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Irvine as well?

Yes. As well as Irvine itself, we cover the rest of Ayrshire and nearby towns such as Kilwinning and Kilmarnock. The process is the same wherever the kitchen is.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

Nearby places we cover

Close to Irvine? We cover these nearby towns too: