Fit-only kitchen fitting in Derby

Thinking about fit-only kitchen fitting in Derby?

Plenty of homeowners in Derby buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked.

Some Derby households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. We work throughout Derby (DE1) and across the wider Derbyshire area.

What we cover for fit-only kitchen fitting in Derby

After the survey visit we write the scope down. For fit-only kitchen fitting in Derby it usually covers:

Laminate or wood worktops cut, jointed, sealed and fixed down
Free survey visit to check your plan, the room and the service positions
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Sink, tap and appliances connected to the existing water, waste and power points
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Packaging and offcuts cleared, with removal of the old kitchen available as an extra

What should you budget for fit-only kitchen fitting in Derby?

The figures below are guide prices for Derby, including VAT and adjusted for typical costs across the East Midlands. The fixed price comes after we have measured up. Costs in the East Midlands sit close to the national guide.

What should you budget for fit-only kitchen fitting in Derby?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,400
Medium kitchen (10–15 units)As above	£2,400–£3,400
Large kitchen (15+ units, island or tall larders)As above	£3,400–£4,400
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£170–£270 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Derby homes

In and around Derby, homes range across gritstone and limestone cottages, Victorian terraces, 1930s semis and former mining village terraces. Terraces in Derby and Chesterfield often have a long galley behind the back room, while stone cottages in the Peak District may have a small kitchen in a rear extension.

Water hardness varies across Derbyshire, so check with your supplier; where it is harder, limescale on taps and boiling water taps is worth planning for. Steep hill villages and narrow lanes can limit delivery vehicles, while terraced streets in the towns may have little parking near the front door.

Do you need approval for fit-only kitchen fitting in Derby?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Homes in the Peak District National Park, listed buildings and conservation areas may need consent for a new vent on a visible wall or alterations to historic features.

Tips before you start

Photograph each pallet and any damaged box as it arrives at your Derby address, and note the damage on the delivery note before the driver leaves.
Book the fit for a date after the full delivery has arrived in Derbyshire; a split delivery is a common reason for a fit stalling halfway.
Order handles in the right quantity with one or two spares; doors and drawers cannot be finished without them, and missing handles hold up sign-off.
If you chose stone worktops, the stone supplier templates and fits them after the base units are fixed, usually one to two weeks later.

Questions about fit-only kitchen fitting in Derby

How much does fit-only kitchen fitting cost in Derby?

Fit-only kitchen fitting in Derby typically costs £1,500 to £2,400 including VAT for a small kitchen of 5 to 10 units, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Derby do you work in?

All of them. Our Derbyshire coverage takes in the whole of Derby, including the DE1 postcode district, as well as surrounding towns such as Belper. If you are unsure, send us your postcode.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Also covering nearby towns

The same service is available a short drive from Derby, including: