Fit-only kitchen fitting in Battersea

Is fit-only kitchen fitting right for your Battersea kitchen?

If your kitchen is ordered for delivery to your Battersea home and the retailer does not offer fitting, fit only covers the labour to put it in properly.

Some Battersea households have a kitchen waiting in a spare room after a fitter dropped out, and need the boxes checked and the fit planned again from the start. We cover all of Battersea, including the SW11 postcode district, and travel out to neighbouring towns across Greater London.

What is included in the work?

Here is what usually goes into fit-only kitchen fitting, adjusted to your Battersea kitchen after we have measured it:

Free survey visit to check your plan, the room and the service positions
Laminate or wood worktops cut, jointed, sealed and fixed down
End panels, filler panels, plinths, cornice and light rail scribed and fitted
Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Delivery checked against the plan and delivery note before fitting starts
Sink, tap and appliances connected to the existing water, waste and power points

Guide prices for fit-only kitchen fitting in Battersea

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for fit-only kitchen fitting in Battersea
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£2,000–£3,200
Medium kitchen (10–15 units)As above	£3,200–£4,600
Large kitchen (15+ units, island or tall larders)As above	£4,600–£5,800
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£230–£360 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

Local homes and their kitchens

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for fit-only kitchen fitting in Battersea?

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book fit-only kitchen fitting in Battersea

If you buy a worktop for a Battersea kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Ask your supplier for the full order list as well as the plan, so the fitter can check part numbers and not just unit sizes.
Store the boxes flat in a dry, heated room rather than a damp garage, so doors and carcasses do not swell or warp before fitting.

Questions about fit-only kitchen fitting in Battersea

How much does fit-only kitchen fitting cost in Battersea?

Fit-only kitchen fitting in Battersea typically costs £2,000 to £3,200 including VAT for a small kitchen of 5 to 10 units, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Battersea?

Yes. We work across Battersea, including the SW11 postcode district, and nearby towns such as Chelsea and Pimlico. Book a free survey visit and we will arrange a time that suits you.

Should I unpack my kitchen before the fitter arrives?

No. Leave everything in its packaging until fitting day. Sealed boxes protect doors and panels from knocks and dust, keep small parts with the right unit, and show that any damage happened before delivery. We open and check the boxes against the plan as the fit begins. The one exception is anything your supplier asks you to inspect on delivery, which you should check and report within their deadline.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Fit-only kitchen fitting near Battersea

Close to Battersea? We cover these nearby towns too: